Brick Paver Installation & Edging



Staging of material

Most paver tasks will vary depending upon access, website conditions, project size and naturally, the weather. These scenarios can have an overall influence on your job from a timing stand point. Cautious factor to consider must be taken to identify the time to begin the paver installation. Always aim to reduce or prevent any traffic on the ready locations.

The supervisor or task manager must always have the materials (sand/ pavers) dispersed around the project website for effective and easy setups. Paver pallets/bundles need to be placed in a way not to hinder the paver installation. The appropriate pallet/bundle placement can make the real project installation simpler and quicker by reducing the general labor of managing the material.

Brick paver patterns

Pavers can be put in several patterns depending on their shape. Each paver shape will typically have numerous different hatch patterns that are offered by the maker.

Professionals require to take into factor to consider the traffic weight loads on their paver tasks. In most applications worldwide, it has been revealed that pavers laid in a herringbone pattern have actually carried out effectively.

Pavers that are 60 mm (2 - 3/8 in) thickness appropriate for pedestrian applications. Pavers that are going to be used in industrial or commercial applications should be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the starting point of a paver job.

When beginning to set up pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface area of the bed linen sand at the ended up elevation of the pavers This will help as a guide for maintaining straight joint lines and will also allow the installer to make modifications in the alignment of the pavers.

Buildings and concrete curbing are typically not straight and ought to not be used for establishing straight joint lines. Using string lines is important to figure out the true straightness of the edge too. As the paver installation advances, the string lines will assist lessen the requirement for little trim pieces.

These will maintain a minimum joint width and permit the bedding and jointing sand to enter in between each paver. Pavers with spacer bars are typically not laid in snug against each other given that a string line will offer consistent joint spacing.

Installation of brick pavers.

One of the most commonly utilized techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the real straight lines that you have actually pulled or above the bed linen sand. The finest method is to place a paver versus another one and let it slide down into the bed linen sand.

When installing pavers on a high grade, they must be installed at the base of the grade going uphill. This will avoid the pavers from creeping South Florida Pavers as they are being laid.

The finest way for setting up pavers on large tasks is to install them mechanically. There are a couple items a specialist should think about before setting up pavers mechanically:

1.) Mechanical installers are just capable of setting up pavers in certain patterns.

2.) The specialist must make certain that the manufacturer can manufacturing and bundling pavers in the preferred pattern on the pallets for simple mechanical installation.

3.) Professionals might encounter a color blending scenario coming off the bundles of pavers Poor color blending might lead to a patchy looking installation. A lot of manufacturers follow color blending on each bundle of pavers, however it is the contractor's obligation to ensure appropriate mixing in the field.

Cutting treatments for brick pavers.

Contractors usually have two ways of cutting pavers. When cutting pavers wet, it will assist decrease dust and will prolong the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting wet, due to the reality that the pavers will develop a slurry that will stain the paver surface.

The brick saw operator ought to always use the correct defense that is needed for operating a saw, such as eye, ear, respiratory and hand security ).

Edging types

Edge restraints play a significant function in the total success of an interlocking pavement installation Edging restraints eliminate lateral movement of the pavers and hold the pavers tightly together. Particularly at the external border of the paver application, without an edging restraint, your project is guaranteed to fail over time.

Generally produced edge restraints are the most typically used by professionals. Produced edging restraints can vary from, plastic edging, steel and aluminum, woods or precast concrete and stone.

Edging installation.

This might result in the migration of the bed linen sand and ultimate lateral movement of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a gap between the pavers and the edging goes beyond 3/8" (10mm), then the area must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compacted. The entire location that is to be compressed must be swept clean of any foreign objects and debris that can trigger scuffing or scratching on the surface of the pavers.

It is necessary to have a compactor that can exert between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is necessary that the very first compaction takes place before any jointing sand has actually been applied to the pavers. This can trigger a bridging problem and will not allow the joints to be entirely filled with jointing sand if jointing sand is used to the pavers prior to compaction takes location. This can also prevent the pavers from being correctly set into the bed linen sand.

When compacting the pavers, it is advised that you make at least two passes in various directions throughout the pavers. This will enable the pavers to be properly embeded in the bedding sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really crucial to the last efficiency of the pavers. Failure to do appropriate compaction can result in contortions and pavement failure in time.


Paver pallets/bundles should be put in a manner not to interfere with the paver installation. One of the most commonly used approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will develop a slurry that will stain the paver surface. Edging restraints remove lateral movement of the pavers and hold the pavers securely together. When a gap in between the pavers and the edging exceeds 3/8" (10mm), then the area should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *